用户名 密 码 登 录 忘记密码 免费注册

网站会员中心 | 设为首页 | 加入收藏

 您好，欢迎光临中国轴承行业网         退出登陆

会员中心 | 设为首页 | 加入收藏

协会

统计

国外文献 > 1.轴承 > 3. 材料与制造 > 制造工艺

关键词搜索：

  • 1 A distribution design for circular concave textures on sectorial thrust bearing pads
       扇形推力轴承垫片上圆形凹面纹理的分布设计
  • 2 A new method of manufacturing a foil bearing using tools made by the rapid prototyping technology
       一种利用快速成型技术制造工具的箔片轴承新方法
  • 3 Additively manufactured porous restrictor for aerostatic bearing
       用于气动轴承的增材制造多孔限流器
  • 4 AM to produce load-bearing prostheses: a viable technological perspective for now, in a near future, or never?
       AM制造承重假体：目前、近未来还是永远无法实现的可行技术视角？
  • 5 An analytical approach for analysis and optimisation of slider bearings with infinite width parallel textures
       用于分析和优化具有无限宽度平行纹理滑动轴承的解析方法
  • 6 An improved TEHL analysis of textured roller bearings consider various texture parameters and slip
       改进的TEHL分析对纹理滚子轴承考虑了多种纹理参数和滑移情况
  • 7 An investigation into surface texture effect on hole-entry hybrid spherical journal bearing performance
       关于表面纹理对孔入口混合球面推力轴承性能影响的研究
  • 8 An investigation into the transient behavior of journal bearing with surface texture based on fluid-structure interaction approach
       基于流固耦合方法对具有表面纹理的轴向轴承瞬态行为的研究
  • 9 Analysis of mixed lubrication performance of water-lubricated rubber tilting pad journal bearing
       水润滑橡胶倾斜垫片轴承混合润滑性能分析
  • 10 Analysis of Surface Textured Air Bearing Sliders with Rarefaction Effects
       具有稀疏效应的表面纹理空气轴承滑块分析
  • 11 Analysis of the best roughness surface based on the bearing area curve theory
       基于承载面积曲线理论的最理想粗糙表面分析
  • 12 ANALYSIS OF THE LOAD BEARING CAPACITY OF CRACKED ADDITIVELY MANUFACTURED POLYMERS USING FAILURE ASSESSMENT DIAGRAMS
       基于失效评估图对裂纹增材制造聚合物承载能力的分析
  • 13 Analysis of the tribological and dynamic performance of textured bearings under contaminated conditions
       污染条件下纹理轴承的摩擦学与动态性能分析
  • 14 Application of modified Reynolds equation for gas lubrication on air bearing analysis
       修正雷诺方程在空气轴承气体润滑分析中的应用
  • 15 Bearing area curve based partitioning for the verification of theoretical supplemental geometry on additively manufactured lattice structures
       基于承载区域曲线的分区方法，用于验证增材制造网状结构的理论补充几何形状
  • 16 CFD ANALYSIS OF A LOW FRICTION POCKETED PAD BEARING
       低摩擦口袋垫轴承的CFD分析
  • 17 CFD Analysis on the Lubrication Behaviours of Journal Bearing with Dimples
       带凹坑的圆柱滚子轴承润滑性能的CFD分析
  • 18 Combined effects of couple stresses and surface roughness on the lubricaftion of short journal bearings
       耦合应力与表面粗糙度对短轴径轴承润滑性能的综合影响
  • 19 Comparisons of Tribological and Vibration Behaviors of Textured Point Contacts of Bearing Steel Lubricated With Oil and Grease Under Starved Conditions
       在缺油条件下，润滑油和润滑脂润滑的轴承钢纹理点接触的摩擦学与振动行为比较
  • 20 Design and performance evaluation of a 3D printed aerostatic bearing concept with high number of micro-orifices
       高微孔数量三维打印气动轴承概念的设计与性能评估
    • 共 123 条记录 第 1 页 ¦ 共 7 页 首页 上一页 下一页 尾页  到第  页 跳转

    VIP网员

    联系我们 | 登录注册 | 会员管理 | 网员服务 | 服务信息 | 广告服务 | 高薪聘请 | 法律声明 | 关于我们

    京公网安备 11010202009788    京ICP备2021015424号